Bar Rod magnets AlNiCo, Deep Pot Holding, steel body, zinc coated AlNiCo-Rod magnet,metal body Ø 50x60 mm
Magnet ID:              ADP-5060
Material: Circular rods made of precision-cast AINiCo 500
Plating / Coating:  zinc coated       
Shape:         Bar / Rod  
Tolerance:         D ±0.1 mm / H ±0.2 mm
Magnetisation Direction:    anisotrop
Maximum Operation Temperature: 450 °C 
Delivery Time:           14-35 days
Article number         D mm                H mm        A¹ mm      Force* N     Weight g      Temperature °C    
ADP-5060          50(+0.1/-0.1)      60(+0.2/-0.2)       10               400                  813                    450        
Measurements:

Deep pot holding magnets
with normal holding force for operating temperatures up to 450 °C order listThese deep pot holding magnets have been in use for several decades and only hold on one end face. This holding surface is ground. The deep pot magnet system concentrates the holding force onto the holding surface and shields all the other surfaces from the effect of the magnet.
For best use of these holding systems it is recommended not to insert them flush into a steel housing, but to leave them projecting by about 2 mm. It is also sufficient to countersink the space around the system with a clearance of about 3 to 4 mm width. A sleeve made from unmagnetised material, e.g. aluminium, brass or plastic is also recommended. If it is only possible to install them in steel directly, a holding force reserve of 30% must be considered when determing the size.
The deep pot holding magnets maintain their holding force indefinitely and do not age. They can only be weakened by strong magnetic fields. With a rise in temperature the holding force only decreases by approx. 10% per 100 °C reversibly.