Bar Rod magnets AlNiCo, Deep Pot Holding, steel body with Threaded Stem, Female Thread, zinc coated, Rod magnet AlNiCo (Aluminum Nickel Cobalt) with metal pot and internal thread.
Magnet ID:              ADPIT-6365
Material: Circular rods made of precision-cast AINiCo 500 and steel body
Plating / Coating:  zinc        
Shape:         Bar / Rod  
Tolerance:           D ±0.1 mm / H ±0.2 mm
Magnetisation Direction:    anisotrop
Maximum Operation Temperature: 450 °C 
Delivery Time:           14-35 days
Article number         D mm                H mm           Thread MxL      Force* N     Weight g      Temperature °C    
ADPIT-6365         63(+0.1/-0.1)     65(+0.2/-0.2)            M12x14                 660                  1274                    450        
Measurements:
 

Deep pot holding magnets (waterproof)
with waterproof surface made from stainless steel, seawater resistant, pressurised-water-tight, usable in food areas order listStrong holding force by component parts with high-energy magnets (NdFeB), non-demagnetisable, no attenuation of the holding force. Operating temperature of - 40 °C to + 110 °C. Only slight loss of holding force due to air gap between holding area and magnet.
Can also be used as a catching element for iron and steel parts. General diameter tolerance h9, with fixing thread at the rear end.
  Option 1: An operation temperature up to + 200 °C is possible using DeltaMagnet.
Option 2: Two magnets, with a counterpole mounting of the magnets in a stainless steel cover the two magnetic surfaces opposite each other are attracted strongly to each other.The construction of watertight end face coupling is also possible.