Bar Rod magnets AlNiCo, Deep Pot Holding, steel body, zinc coated AlNiCo-Rod magnet,metal body Ø 63x65 mm
Magnet ID: ADP-6365
Material: Circular rods made of precision-cast AINiCo 500
Plating / Coating: zinc coated
Shape: Bar / Rod
Tolerance: D ±0.1 mm / H ±0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 450 °C
Delivery Time: 14-35 days
Article number D mm H mm A¹ mm Force* N Weight g Temperature °C
ADP-6365 63(+0.1/-0.1) 65(+0.2/-0.2) 10 660 1306 450
Measurements:
Deep pot holding magnets (waterproof)
with waterproof surface made from stainless steel, seawater resistant, pressurised-water-tight, usable in food areas order listStrong holding force by component parts with high-energy magnets (NdFeB), non-demagnetisable, no attenuation of the holding force. Operating temperature of - 40 °C to + 110 °C. Only slight loss of holding force due to air gap between holding area and magnet.
Can also be used as a catching element for iron and steel parts. General diameter tolerance h9, with fixing thread at the rear end.
Option 1: An operation temperature up to + 200 °C is possible using DeltaMagnet.
Option 2: Two magnets, with a counterpole mounting of the magnets in a stainless steel cover the two magnetic surfaces opposite each other are attracted strongly to each other.The construction of watertight end face coupling is also possible.
