Bar Rod magnets AlNiCo, Deep Pot Holding, steel body, zinc coated AlNiCo-Rod magnet,metal body Ø 17x20 mm
Magnet ID:              ADP-1720
Material: Circular rods made of precision-cast AINiCo 500
Plating / Coating:  zinc coated       
Shape:         Bar / Rod  
Tolerance:         D ±0.1 mm / H ±0.2 mm
Magnetisation Direction:    anisotrop
Maximum Operation Temperature: 350 °C 
Delivery Time:           14-35 days
Article number         D mm                H mm        A¹ mm      Force* N     Weight g      Temperature °C    
ADP-1720          17(+0.1/-0.1)      20(+0.2/-0.2)       6               30                  35                    350        
Measurements:

 Casting or sintering process is applied for making alnico magnets. The first step involves the pouring of molten metal alloys into moulds. Later it is passed through various heat cycles. The resultant magnets have rough surface which after machining gives a glossy look.
 Sintered magnets are produced by compacting fine alnico powder in a press, and then sintering the compacted powder into a solid magnet.
 Alnico magnets can only be magnetized only in the field having magnetizing fields of about 3 kOe. Since these magnets have low coercivity they, must be protected from the adverse repelling fields as this could partially demagnetize the magnets.