Magnetisation Grade:         N35
Magnet Material: Neodymium-Iron-Boron (NdFeB, Neo)
Magnet ID:              RMS-CM-2
Plating / Coating:  Red Rubber or Plastic Jacket       
Shape:         Magnetic systems with Threaded Bushing
Rubber Coated Magnetic systems Magnet Size:  custom-made
Tolerance:         ±0.05 mm
Magnetisation Direction:    Axial /  Diametrical
Residual Magnetic Flux Density (Br):  1170-1220 mT (11.7-12.2 kGs)
Energy Density (BH)max:              263-287 KJ/m³  (33-36 MGOe)
Coercivity Force (Hcb):              ≥ 868 kA/m ( ≥ 10.9 kOe)   
Intrinsic Coercivity Force (Hcj):   ≥ 955  kA/m ( ≥ 12 kOe)   
Maximum Operation Temperature: 80 °C 
Delivery Time:           14-35 days   
Measurements:
Neodymium Pot Magnets. Widely used in assorb! The following items are the relative products of the NdFeB Pot Magnets, you can quickly find the NdFeB Pot Magnets through the list.
This neodymium ring magnet in a steel pot is countersunk. It can be fastened with a countersunk screw. The steel pot substantially increases the holding power of the magnet, but requires full contact with the opposing part, e. G. A steel plate. Magnets in steel pots don't have much effect into the distance, i. E. They are not suitable to attract a metal item from a distance, but they are very well suited to hold on to a piece of metal in full contact.