Magnetisation Grade: N38
Magnet Material: Neodymium-Iron-Boron (NdFeB, Neo)
Magnet ID: RMS-CB-31-N38
Plating / Coating: Rubber or Plastic Jacket
Shape: Magnetic systems with with Hole / Cylinder Bore
Rubber Coated Magnetic Systems Size:
Total weight 20 g
Total height H 6 mm
Total diameter D 31 mm
Inner diameter d1 6 mm
Diameter top d2 9 mm
Hole depth h2 9 mm
Tolerance: ±0.05 mm
Magnetisation Direction: Axial / Diametrical
Residual Magnetic Flux Density (Br): 1220-1250 mT (12.2-12.5 kGs)
Energy Density (BH)max: 287-310 KJ/m³ (36-39 MGOe)
Coercivity Force (Hcb): ≥ 899 kA/m ( ≥ 11.3 kOe)
Intrinsic Coercivity Force (Hcj): ≥ 955 kA/m ( ≥ 12 kOe)
Maximum Operation Temperature: 80 °C
Delivery Time: 14-35 days
Measurements:
Rubber Coated Magnet Cup Assemblies
Rubber coated magnetic holding base
Rubber covered magnet holder
Rubber Coated Magnet Cup Assemblies
Rubber Coated Magnet Cup Assemblies are specially used in the places where people don't want magnet holders scratch steel surfaces or paint coating.
We have in stock for customer immediate needs. Besides, we can make other sizes to custom designs.
Max pull is tested on a ½†thick and flat machined steel plate. The actual pull should be smaller if your steel is thinner, rough, rusty, coated or not very flat. For any critical applications, three-time safety factor is strongly recommended.
