Magnetisation Grade:         N35
Magnet Material: Neodymium-Iron-Boron (NdFeB, Neo)
Magnet ID:              RMS-ET-12-N35
Plating / Coating:  Rubber or Plastic Jacket       
Shape:         Magnetic systems with External Thread 
Magnetic systems Magnet Size: 
Total weight 4.5 g
Total height H 15.5 mm
Total diameter D 12 mm
Pot height h1 7.5 mm
Thread standard m M4
Thread length h6 8 mm
Tolerance:         ±0.05 mm
Magnetisation Direction:    Axial /  Diametrical
Residual Magnetic Flux Density (Br):  1170-1220 mT (11.7-12.2 kGs)
Energy Density (BH)max:              263-287 KJ/m³  (33-36 MGOe)
Coercivity Force (Hcb):              ≥ 868 kA/m ( ≥ 10.9 kOe)   
Intrinsic Coercivity Force (Hcj):   ≥ 955  kA/m ( ≥ 12 kOe)   
Maximum Operation Temperature: 80 °C 
Delivery Time:           14-35 days   
Measurements:

Neodymium Iron Boron Assemblies
Neodymium Iron Boron Pot Magnets deliver large holding powers in small packages. These magnets are designed to be “Low Profile, “ but still incorporate a tapped hole in the back wall for mounting.
The Rare Earth Magnets not only have a potent attraction while in direct contact with a work piece, but  they also have excellent field projection capabilities.
NEODYMIUM with higher operating Temperatures are available in these Pot  Magnets.  Samarium Cobalt and Stainless shells and shields are also manufactured.  The all Stainless Pot Magnets, for both Alnico and Neodymiun, are a level I or II food grade unit.
All Pot Magnets are Centerless Ground after pressing to ±0.003”. The standard tolerance on the lengths is ±0.010”. Tighter tolerances are available upon request.