Magnetisation Grade:         N35
Material: Neodymium-Iron-Boron (NdFeB), Neodymium and Steel 
Magnet ID:              NPIT-10-N35-Zn
Plating / Coating: Zinc (Zn)     
Shape:         Disc / with Threaded Stem / Internal Thread   
Pot Magnet Size: 
Pot diameter (D): 10 mm
Thread height (H6): 7.5 mm
Total height  (H): 11.5 mm
Thread (M): M3
Tolerance:         ±0.1 mm
Magnetisation Direction:    Axial   
Residual Magnetic Flux Density (Br): 11.7-12.2 KGs (T):  1.17-1.22 T 
Energy Density (BH)max:              33-36 MGOe   263-287 KJ/m³   
Coercivity Force (Hcb):              ≥10.8 KOe  ≥860 KA/m   
Intrinsic Coercivity Force (Hcj):    ≥12 KOe    ≥955 KA/m   
Maximum Operation Temperature: 80 °C 
Delivery Time:           14-35 days   
Measurements:

Internal Threaded Stud
XFMAG magnets is sole provider of pot magnets that are internally threaded stud popularly known as Internal Threaded Stud. These magnets have a very large force, which can clamp down the ferromagnetic material because of its Ni or Zinc plated mild steel. Thus, allow a magnetic circuit with improved material, which can achieved with minimal sizes.
Pot Magnets with internal thread studBoss mounting have that thick steel backing with female thread section. With help of threads like M4 and M10 screw and a bolt, these magnets have a platform, which can hold the pot magnets with much efficient internal thread with StudBoss mounting on the place.
These pot magnets also exists in ferrite and NdFeB magnets, within the area of pot assembly makes it easily mountable on any surface.  The NdFeB versions have maximum temperature up to +180 Degrees C.