Bar Rod magnets NdFeB, Deep Pot Holding, galvanized coated, steel body with threaded neck, Rod magnet NdFeB (Neodymium-Iron-Boron).
Magnet ID:              NDPTG-1020
Material: Circular rods made of NdFeB and steel body
Plating / Coating:  galvanized        
Shape:         Bar / Rod
Tolerance:           D ±0.1 mm / H ±0.2 mm
Magnetisation Direction:    anisotrop
Maximum Operation Temperature: 80 °C 
Delivery Time:           14-35 days
Article number         D mm                H mm            Thread MxL       Force* N         Weight g      Temperature °C
NDPTG-1020         10(+0.1/-0.1)     20(+0.2/-0.2)           M4x8               24                  11                    80        
Measurements:

In low moisture content, our all pot magnets are very useful in ambient temperature applications. NdFeB Pot Magnets are considering as the best in pulling up maximum strength that too with a small size. In fact, all our pot magnets offers handful of benefits, depending on different applications, here are few of these magnets and their usages, which are as follows:
 
1) Ferrite Pot Magnets are useful for corrosion resistance, marine, low cost and higher temperature applications.
2) Alnico Pot Magnet is very effective, which can work on different higher temperature applications and where the pull force needs to change as little as possible with temperature variation. Alnico Pot Magnets are also useful in corrosion resistance applications.
3) SmCo Pot Magnets have high resistance and it can work on extreme temperature applications and marine / corrosion resistance applications.