Bar Rod magnets NdFeB, Deep Pot Holding, zinc coated,  steel body with fitting tolerance h6, Rod magnet NdFeB (Neodymium-Iron-Boron).
Magnet ID:              NDPS-0410
Material: Circular rods made of NdFeB and steel body
Plating / Coating:  Zinc / galvanized        
Shape:         Bar / Rod
Tolerance:           D ±0.1 mm / H ±0.2 mm
Magnetisation Direction:    anisotrop
Maximum Operation Temperature: 80 °C 
Delivery Time:           14-35 days
Article number         D mm                H mm             A¹ mm       Force* N     Weight g      Temperature °C    
NDPS-0410         4(+0.1/-0.1)     10(+0.2/-0.2)           7                2.5                  1                    80        
Measurements:

Neodymium Iron Boron Assemblies
HSMAG Neodymium Iron Boron Pot Magnets compliment our Alnico Pot Magnets by delivering large holding powers in small packages. These magnets are designed to be “Low Profile,” but still incorporate a tapped hole in the back wall for mounting.
The Neo Pot Magnets not only have a potent attraction while in direct contact with a work piece, but they also have excellent field projection capabilities.
NEODYMIUM with higher operating Temperatures and Intrinsic Coercive Forces are available in these Pot Magnets. Samarium Cobalt and Stainless shells and shields are also manufactured. The all Stainless Pot Magnets, for both Alnico and Neodymium, are a Level I or II food grade unit.
All HSMAG Pot Magnets are Centerless Ground after pressing to +0.001″ / -0.000″. The standard tolerance on the length is +/-0.015″. Tighter tolerances are available upon request.