Bar magnet NdFeB, brass body with fitting tolerance h6, Rod magnet NdFeB (Neodymium-Iron-Boron).
Magnet ID: NDPBT-1620
Material: Circular rods made of NdFeB and brass body
Plating / Coating: galvanized
Shape: Bar / Rod
Tolerance: D ±0.1 mm / H ±0.2 mm
Magnetisation Direction: anisotrop
Maximum Operation Temperature: 80 °C
Delivery Time: 14-35 days
Article number D mm H mm A¹ mm Distance mm Force* N Weight g Temperature °C
NDPBT-1620 16 20(+0.2/-0.2) 2 3.0 150 30 80
Measurements:
Pot Magnets
Pot or Cap Magnets substantially increase the holding ability of disc and ring magnets that are fixed permanently and located in the centre of the steel pot or cap. The lower side of the magnet is in direct contact with bottom of the pot and the top side of the magnet is fractionally lower than the top edges of the pot. The outside diameter of the magnet less than the inside diameter of the pot, leaving a 2-4 mm spacing around the magnet which is generally filled with resin. A very strong locking field exists around the perimeter of the pot between the top of the magnet and the pot top edge returning the reverse side field. Alternative mounting options are available as shown in the photos.